Monday, July 22, 2013

Sheepshead Tips and Rig


This post includes additional info and graphics along with the published article from the July 2013 issue of The Chesapeake Angler.

Sheepshead can give one heck of an adrenaline rush, especially in a kayak. The stark contrasting bars that mark their body earned them nickname, convict.  And when hooked, they definitely run like they just broke out of jail.  A trophy sized sheepshead will put your tackle to the test and challenge your ability to negotiate the structures they dwell.  Kayakers who know what to look for can take advantage of the world class sheepshead fishery that is the Chesapeake Bay.  


Starting in mid June through late October, Sheepshead can be found on most structures in the Chesapeake Bay.  The CBBT bridge structures along with the rock islands tend to hold the biggest convicts.  One of the advantages of fishing in a kayak is that we can rub right up against the pilings.  I like to feel for rubble at the bottom and target those pilings most.  Sheepshead are also known to stay suspended and even just under the surface near the pilings.  They have also been known to hang underneath schools of spadefish as well.  

My rig of choice is a dropper loop about 10” to 16” above a 2-6 ounce sinker.  I use 50-60lb fluorocarbon leader and 2/0-4/0 super sharp Owner cutting point J hooks.  I like to have about 2 to 3 feet of flourocarbon above the dropper loop.  I tie up several rigs with swivels at the top for ease of attaching and put them in a leader wallet.  When fishing in thick structure, there’s a good chance you will go through several rigs.  Another rig people seem to like is a carolina rig style set up with a 2-4 ounce egg sinker over a swivel to a foot or foot and a half of flourocarbon leader to hook.  This rig would be good for suspended fish in my opinion.  My main line is 40-50lb braid which is spooled up on a quality baitcaster with tight and smooth drag.  A 7 foot fast action-medium heavy rod, that’s sensitive yet has enough back bone to withstand some serious pullage will do.  I've been using a Shimano Trevala S jigging rod and enjoy the light weight and great balance but have full confidence in it's ability to put on enough pressure.  Lately, my preference for the reel has been a Curado 300 EJ.




Baits of choice are fiddler crabs or mole crabs aka sand fleas.  Fiddlers can either be caught in the marsh or bought at most tackle/bait shops in the area.  My preference is to take the big claw off and send the hook through the subsequent hole and out through the top. I'll save the big claws just in case I run out of fiddlers. I've caught big sheepshead on just the claw. Mole crabs can be caught in the surf using various methods, including hand digging, as well as half a minnow trap sifted through the sand where the water meets the sand, but a mole crab rake is best.  I hook the mole crabs through the apron (small flap on the underside) and send the barb through the top. Convicts will also eat various other crustaceans, including clams, mussels, other crabs, etc.  

I normally start by working the bottom, but if I don't get a bite after a few minutes, I'll reel up 4-5 cranks and suspend the bait. The bite is hard to explain.  They can be quite the bait stealer, but once you figure out the bite, you’ll figure out the timing of when to set the hook.  In the mean time, for beginners, I’d suggest to go ahead and swing if you think there was a bite.  I’d rather swing and miss than bring up an empty hook over and over again.  Sometimes you’ll just feel a sudden weight on the other end without even feeling a bite.  For that situation, definitely go ahead and swing. If you feel a heavy weight, reel as much line in as you can before it realizes what's happening.



The ensuing runs will astonish even seasoned anglers. If you’re fishing around a piling and it starts taking you around the structure; as soon as you feel your line rubbing the piling put your reel in free spool and paddle through then engage again.  Otherwise your chances at pulling that big sheepie back through are slim to none.  


Once you’ve landed a big one on your kayak, beware of the large spikes along the dorsal and anal fins.  They’re gnarly and while flailing, will leave you bloody if you’re not careful.  You will also notice the strangely human like teeth of the sheepshead.

A note about the sheepshead I’d like to share is that once they reach the 20-22” range they take a very long time to grow to trophy size.  Although they are excellent table fare, I urge you to consider releasing trophy size sheepsheads (24” and above) since we would all like to see the specie thrive for a long time.  


 

19 comments:

  1. Great write up, can't wait to get on some of these.

    ReplyDelete
  2. Thanks Rob for this article, maybe someday I will have a chance at these fish. Armed with the right tools. Knowledge is power thanks for being the teacher!

    ReplyDelete
  3. Nice write up Rob, I hope to get to the CBBT soon and get my first sheep/spade/trigger and from what i hear lately....big nasties

    ReplyDelete
    Replies
    1. Thank you. The big uglies are insanely frustrating as legit hook ups are very rare. Good luck.

      Delete
  4. Thanks Rob. Great information.

    ReplyDelete
  5. You Sir are the man! Thanks so much for taking time to spread the knowledge and passion!

    ReplyDelete
  6. Hola Rob.
    Me a gustado mucho tu esplicacion,espero poder practicarlo en breve en mi costa,gracias,un abrazo.

    ReplyDelete
    Replies
    1. Espero que ayude, Juan. Gracias como siempre

      Delete
  7. Great writeup Rob - I need practice on the dropper loop you use. Tried watching it online but I guess I am a hands on person if you ever have the time. There's a citation-class sheepie I have a rendezvous with in the near future. I'll be better prepared now - thanks!!

    ReplyDelete
  8. How do you get your dropper loop through the eye of the owner cutting point 2/0 hook? It's just not working for me.

    ReplyDelete
    Replies
    1. I usually pinch it and squeeze it through. If it's not fitting, just a 3/0.

      Delete
  9. Rob
    Thanks for the great article. I have been using your rig, and while we don't have sheepshead up in Long Island it has worked great. I landed a ton of porgies, cunner, and puffers with it. I also go my first New York trigger with it, which feels pretty good, because they aren't usually native to our waters.

    ReplyDelete
    Replies
    1. Very cool! My dad and I used to target porgies a lot when I lived up there. And yeah, never heard to triggers in NY. Thanks for the comment!

      Delete

Note: Only a member of this blog may post a comment.